TUBULAR BRACKET ARMS

Page 51

Specifications:			Optional Extras:
	Fabricated in prime mild steel tube to BS-EN10025-S275.			Can be supplied painted with semi-gloss primer to the required colour over the hot dip galvanised finish.
	Manufactured I.A.W. BS5649.			Bracket types BA2, BA3, BA4, BA6 & BA7 are available with a web plate welded in if required.
	Standard finish is hot dipped galvanised to BS EN 1461.
	All brackets supplied with 8 No. M10X16mm stainless steel sockets set screws.		Note: Can be manufactured to alternate specifications if required. SEE FOLLOWING PAGE FOR DATA SHEET.
	Bracket types BA1, BA2, BA3 & BA4 are designed to fit over a reducer spigot in the top of the shaft, allowing the bracket to be flush with the column or can fit over the shaft.
	Bracket types BA5, BA6, BA7 & BA8 are designed to fit inside the top of the shaft and held in place by the socket set screws located in the top of the shaft clamping onto the bracket spigot. This gives a flush finish between the bracket tube and column shaft.
	All brackets are designed to maintain normal mounting heights on 5,6,8,10 & 12M columns.