The TOFCO range of pre-wired distribution panels are tailor made for various exterior lighting applications to meet our client’s specification.
With over 20 years of panel building experience for the UK and export market we have specialised in
supplying Pre-wired Panels & Feeder Pillars into the Street Lighting and Electrical Contractor Sectors.

TOFCO Feeder Pillar and Control Panels are currently powering Motorway & Local Authority Lighting,
CCTV, Airports, Rail, Schools, Car Park, Traffic Lights, Data and Communication Applications.

TOFCO provide a full schematic and lay-out drawing service to meet your specification. As part of our ISO 9001 QA
Procedures TOFCO “PAD” (Panel Assembly Design) drawings are submitted to our clients for approval prior to build stage.

We manufacture a wide variety of Electrical Control Panels – single or three phase, individual or group switched with a variety of protective
devices Fuses, MCB, RCD, RCBO etc. Optional internal components include light, heater, thermostat, RCD socket, document holders.

Our aim is to meet your specification and exceed your requirements

Control Equipment

The following are generally required to be fitted as standard to the enclosure backplate. Other equipment may be specified:-

* A Single Pole & Neutral (SPN) or Three Phase & Neutral (TPSN) incoming isolator or fuse switch, with door interlocking facility.
* A suitable number of MCB’s or BS88 fuse carriers for outgoing and auxiliary circuits - type, number and ratings as specified.
* A Neutral shrouded terminal busbar for connection of up to 11 x 25mm² cables in addition to the control panel internal wiring.
* Enclosure body, door and chassis plate fully bonded to the earth bar.
* Relevant circuit identification and Safety Earth labels.

Additional Options

Examples of optional equipment that may be fitted to the enclosure are as follows:-

* A suitably rated contactor(s) when switching is specified.
* A brass gland plate attached to the bottom of the box for cable termination.
* A switch unit for a 2 part photocell.
* A photocell connector block.
* Neon indicators on incoming and / or outgoing circuits.
* A suitably rated anti-condensation heater - 15, 20 or 60W.
* Terminal Blocks to accept cable sizes greater than 16mm².
* Override switch, toggle or illuminated rotary.

The following may also be fitted as options when supplied with our range of Feeder Pillar Cabinets:-

* External 13A RCD protected socket - for maintenance purposes.
*Light and Switch inside the cabinet.

Back to top of page

The content of this web site is the intellectual property of Tofco CPP Limited. The materials contained in the Site may be downloaded or copied provided that ALL copies retain the copyright and any other proprietary notices contained on the materials. No material may be modified, edited or taken out of context such that its use creates a false or misleading statement or impression.  Whilst every care is taken to ensure that the information contained in this publication is correct, no legal responsibility can be accepted for any inaccuracy. The company reserves the right to alter or modify the information contained therein at any time in the light of technical or other developments.