Festive Units
Moulded from flame retardant self extinguishing ABS
TOFCO offers a wide selection of Festive Lighting Solutions to meet our Clients requirements and a pre-wired stainless steel commando socket & mounting kit. The FME - 4 Module enclosure can be supplied with a range of protective devices including fuses, MCB's, RCD, RCBO, digital time clocks & contactors. Extension boxes and gland plate options are available for larger cable sizes.
Type 1 - Festive Type 2 - Festive Type 3 - Festive
Festive Units
FMI/F1L/TIM/R106L/ABS
T1 / Festive

1 x FME 4 module enclosure with 32A double pole switch, 1 x 6A 30mA RCBO protective device controlled by digital time clock. 1 x BS88 fuse carrier for an upward lantern circuit, earth & neutral block, ABS gland plate 2 x 25mm grommets for DNO incoming supply.

Dimensions
Height: 172 x Width: 90 x Depth: 91mm
(Optional B2S add 60mm length)

FME/F2L/TIM + FMIO/R106L/ABS
T2 / Festive

2 x FME 4 module enclosure with 32A double pole switch, 1 x 6A 30mA double pole RCBO protective device controlled by digital time clock. 2 x BS88 fuse carrier for an upward lantern circuit, earth & neutral block, ABS gland plate 2 x 25mm grommets for DNO incoming supply.

Dimensions
Height: 344 x Width: 90 x Depth: 91mm

FME/F1L/TIM + FMIO/F1S/R106L/ABS
T3 / Festive

2 x FME 4 module enclosure with 32A double pole switch, 1 x 6A 30mA double pole RCBO protective device controlled by digital time clock. 2 x BS88 fuse carrier for one upward lantern circuit & one downward fused spur circuit, earth & neutral block, ABS gland plate 2 x 25mm grommets.

Dimensions
Height: 344 x Width: 90 x Depth: 91mm

Festive Socket & Mounting Kit IP67 3 Pin 16A Festive Socket and plug angled 45 degree fitted to a stainless steel column-mounting bracket, with rear entry PG stuffing gland for pre-wired with 10 meters of arctic blue 3 core 2.5mm flexiblecable.

Notes:
RCBO ratings can be changed on request.
Extension box and brass gland plate options available for SWA cable.
Digital time clocks are supplied to come on at 16:00 and off at 00:00,
this can be changed if required.
Other configurations available on request.